500LPH Two Stage Ro System With Edi Water Treatment Equipment
Product Descriptions of EDI Water Treatment Plant
RO & EDI
RO and EDI water production and flushing time can be set. When the water is in peak, the water production time can be adjusted and the water point can be used to stabilize the water consumption.
RO(Reverse Osmosis), the basic working principle is : using of a special high pressure pump, increasing pressure to raw water, then force raw water penetrating through reverse osmosis membrane under the pressure. Only water molecules and solvent less than microns
can pass through the RO membrane.
EDI (Electrodeionization) is a revolutionary water treatment technology ,it is a membrane separation desalination technology that skillfully combined the electrodialysis technology and ion exchange technology together ,which is high-tech , green and environmental protection technology. EDI plant has very high requests to raw water, usually we use double stage RO system production water as its raw water.
Product Technical Parameters of EDI Water Treatment Plant
| EDI System |
| Model | JFEDI-500LPH |
| Host Size | can be customized |
| Operating Pressure | 0.1-0.3MPa |
| Recovery Rate | 95% |
| Rack Material | SUS304/Carbon Steel (Optional) |
| Pipe Material | U-PVC/ C-PVC/Stainless steel (Optional) |
| EDI Brand | Ionpure/Canpure/GE (Optional) |
| Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
| Tank Material | SS/FRP(Optional) |
| Outlet Flow | 500L/h |
| Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Process characteristics:
Continuous electro-dedesalting (EDI) is a process of adsorbing anions in water supply using a mixed ion exchange resin and removing them separately through an ion exchange membrane under the action of dc voltage. This process is electrically continuous and does not require the use of acid and base pairs for regeneration. The new technology could replace conventional ion exchange devices and produce ultra-pure water of 16-18 megohm ·CM. EDI is the use of negative, cationic membrane, using the form of symmetrical stacking, in the negative, cationic membrane sandwiched between the negative, cationic resin, respectively under the action of dc voltage, negative, cation exchange. At the same time, under the action of voltage gradient, water will be electrolyzed to produce a large number of H+ and OH-, these H+ and OH- to the ionic membrane in the middle of the negative and cation constantly regenerate. EDI keeps exchange - regeneration, making the purity of water higher and higher, so it is easy to produce high purity of high purity water.
Advantages of EDI compared with traditional mixed bed:
The advantages of continuous desalting by electrodialysis and deep desalting by ion exchange are retained;
Compared with ordinary ion exchange resin column, the amount of ion exchange resin is less, saving more than 95% of resin;
Ion exchange resin does not need acid and alkali chemical regeneration, saving a lot of acid and alkali and cleaning water, greatly reducing labor intensity;
No waste acid waste lye discharge, is clean production technology, green environmental protection products;
The process is easy to realize automatic control, EDI and reverse osmosis (RO), UF and other water treatment technology combined, can form a perfect high pure water production line;
Small footprint, and do not need to be like ion-exchange beds, a set of in-use, a set of regeneration of the repeated Settings.
Workflow Chart of EDI Water Treatment Plant
Applications of EDI Water Treatment Plant
Electronic chip high pure water;
Power high pressure boiler supply water;
Chemical, metallurgy, electroplating and other industries pure water, high pure water;
Biotechnology, pharmaceutical industry, medical devices, experimental technology ---- pure water, high pure water.
Real picture of product of EDI Water Treatment Plant
Jufu's Five Guarantees
Focus on water treatment industry for 14 years, High quality with stable performance.
ISO9001 Quality System Certified.
Provide Water Treatment Solutions free of charge.
Onsite installation service is available.
Lifetime after-sales service available.
FAQ:
Q: What’s the type of your company? Manufacturer or trade agent?
A: We are a high-tech manufacturer engaged in water treatment industry for nearly 20 years, specializing in water treatment, water purification equipment and technology research and development, manufacturing, sales, engineering installation and consulting.
Q: What is the lead time?
A: Typically, the production cycle is 3-5 weeks, depending on your project.
Q: How long do you guarantee it?
A: We offer a one-year warranty. Under the correct use and maintenance, the service life of the product itself is about 5 years.
Product Tags:
|
|
500LPH EDI Water Treatment Plant Two Stage RO System Images
|
