1000LPH Mini Water Treatment Plant Industrial Water Purification System SUS304

1000LPH Mini Water Treatment Plant Industrial Water Treatment Equipment Water Purification System

Product Introduction of RO Water Treatment System
The principle of reverse osmosis is to apply a certain pressure to water, so that water molecules and ionic mineral elements pass through the reverse osmosis membrane. However, most of the inorganic salts (including heavy metals), organic matter, bacteria and viruses dissolved in the water cannot pass through the reverse osmosis membrane, thereby strictly separating the permeated pure water from the impermeable concentrated water; reverse osmosis is a selective membrane that can only pass through the water. The process of separating the water molecules in the water from the solute cannot be carried out by the selective permeability of the solute, and the pressure higher than the osmotic pressure is used as the driving force. Reverse osmosis internal structure PP cotton, compressed activated carbon filter element, activated carbon: 5 micron pore size filter element, remove residual sediment, rust and other tiny impurities in water; further remove residual chlorine, odor and solid impurities in water; it can better improve water quality smell.

The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to a pressure of 6-20 kg, the raw water permeates through the reverse osmosis membrane with a pore size of only 0.0001 microns under the action of pressure. Chemical ions, bacteria, fungi, and virions cannot pass through, and are discharged with wastewater. Only water molecules and solvents with a volume of less than 0.0001 microns are allowed to pass through.

Technical Specifications of RO Water Treatment System

Advantages of RO water treatment system:
Reverse osmosis equipment belongs to physical desalting method, which has many advantages.
1) Non-phase-change physical method was used to desalinate and purify the saline water under norma temperature.
2) Desalting rate of single membrane element is 99.3% and can remove colloid, organics, bacteria, virus and all kinds of heavy metals in water at the same time.
3) With water pressure as the driving force, energy consumption is the lowest among many treatment methods.
4) No need for large amount of chemical treatment, no elimination of chemical waste liquid, no environmental pollution, and the recovery rate is over 70%.
5) High automation program, automatic stop in case of ailure, with automatic protection function.
6) The system is simple, easy to operate, and the water quality is stable.
7) Equipment covers small area, compact structure, reliable operation and high water quality.

Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.



Photos of reverse osmosis water treatment system






















FAQ:

1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)

Model 4040 is designed by 0.25m3/h

Model 8040 is designed by 1-1.2m3/h

2. What is the material of mechanical filter?

Carbon steel, stainless steel, fiberglass

3.What are the multi-way control valves?

Manual control valve, automatic control valve

Multi - way control valve is divided into: filter valve and softening valve

Automatic control valve is divided into: time type and flow type.

Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.

1000LPH Mini Water Treatment Equipment

SUS304 Industrial Water Purification System

Reverse Osmosis Water Purification System

1000LPH Mini Water Treatment Plant Industrial Water Purification System SUS304 Images